Kurser og guides i MakerSpace
Makerspace er lokaliseret i Videnbyen, Cortex Park 26, Odense M (tæt på Campus). Nedenfor kan du tilmelde dig vores kurser, ved at trykke på overskriften.
-
Laser cutter course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 01.september kl. 09:30 - 11:00
Sprog: English,Dansk
In this hands-on course you will learn how to operate the laser cutter in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Safety course at MakerSpace
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 02.september kl. 11:00 - 11:30
Sprog: Dansk,English
This is an entrance granting safety course, that will go through the general rules and guidelines at MakerSpace, and give you access to enter our Prototyping Lab. BEWARE: Additional courses are needed to access certain machines.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 03.september kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Sewing and overlocker course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 04.september kl. 09:30 - 11:00
Sprog: Dansk,English
Want to learn how to thread a sewing machine and learn the basics of sewing so you can get started on your own projects?
-
Laser cutter course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 07.september kl. 13:30 - 15:00
Sprog: English,Dansk
In this hands-on course you will learn how to operate the laser cutter in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 09.september kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 10.september kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Waterjet Cutter Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 11.september kl. 09:30 - 11:00
Sprog: English,Dansk
This is a course on how to operate our new Waterjet cutter.
-
Sewing and overlocker course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 16.september kl. 09:30 - 11:00
Sprog: Dansk,English
Want to learn how to thread a sewing machine and learn the basics of sewing so you can get started on your own projects?
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 16.september kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 17.september kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 21.september kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Laser cutter course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 21.september kl. 13:30 - 15:00
Sprog: English,Dansk
In this hands-on course you will learn how to operate the laser cutter in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 22.september kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Laser cutter course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 28.september kl. 13:30 - 15:00
Sprog: English,Dansk
In this hands-on course you will learn how to operate the laser cutter in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Sewing and overlocker course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 29.september kl. 09:30 - 11:00
Sprog: Dansk,English
Want to learn how to thread a sewing machine and learn the basics of sewing so you can get started on your own projects?
-
Laser cutter course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 05.oktober kl. 13:30 - 15:00
Sprog: English,Dansk
In this hands-on course you will learn how to operate the laser cutter in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Waterjet Cutter Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 07.oktober kl. 09:30 - 11:00
Sprog: English,Dansk
This is a course on how to operate our new Waterjet cutter.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 14.oktober kl. 12:30 - 14:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 15.oktober kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Laser cutter course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 20.oktober kl. 09:30 - 11:00
Sprog: English,Dansk
In this hands-on course you will learn how to operate the laser cutter in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Sewing and overlocker course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 21.oktober kl. 09:30 - 11:00
Sprog: Dansk,English
Want to learn how to thread a sewing machine and learn the basics of sewing so you can get started on your own projects?
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 21.oktober kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 22.oktober kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 28.oktober kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 29.oktober kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 04.november kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 05.november kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 12.november kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 18.november kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 25.november kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Safety course at MakerSpace
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 02.december kl. 08:30 - 09:30
Sprog: Dansk,English
This is an entrance granting safety course, that will go through the general rules and guidelines at MakerSpace, and give you access to enter our Prototyping Lab. BEWARE: Additional courses are needed to access certain machines.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 02.december kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 03.december kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 09.december kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
Vinyl Cutter / Cutter Printer Course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 10.december kl. 13:30 - 15:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the vinyl cutter and printer machines in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.
-
3D-printer course
Hvor: Odense, Videnbyen - MakerSpace,Odense, Videnbyen - MakerSpace
Hvornår: 16.december kl. 09:30 - 11:00
Sprog: Dansk,English
In this hands-on course you will learn how to operate the 3D printers in MakerSpace. You will learn the guidelines of how to use MakerSpace and discover the opportunities of creating prototypes.